This is a high-precision electromagnetic flowmeter recently developed for an enterprise. (The following is a picture of the machine at the time of testing) This electromagnetic flowmeter has the following characteristics: 1) high-precision measurement: the flow speed and flow of the fluid can be measured accurately, usually within three-thousand-thousand error ranges for applications requiring high-precision flow measurements. 2) low pressure: because of the lack of a nostril component, the flow meter has little resistance to the fluid, and is applied to situations that require higher pressure on the fluid. 3) Extensive fluid adaptation: applies to measuring conductive liquids, including...
This is a high-precision electromagnetic flowmeter recently developed for an enterprise.
(The picture below is the machine picture during the test)
The features of this electromagnetic flowmeter are:
1) High precision measurement: the flow rate and flow of the fluid can be measured accurately, usually within three parts per 1,000, and applies to the application scenes requiring high accuracy flow measurement.
2) Low pressure: In the absence of a fluid-saving component, the flow meter has a small resistance to the fluid, which is virtually non-compressive and applies in situations where the fluid pressure requirements are high.
3) Extensive fluid adaptation: applies to measuring conductive liquids, including water, sewage, acid alkaline, plasma, etc., and is widely applied in various industrial areas.
4) Width scale ratio: Capable of adjusting to wide range flow measurements, from small to large flows, to meet different job needs.
5) High stability and repetition: measurement results are of a high degree of stability and good repetition, ensuring consistent measurement performance during long periods of use.
6) Intuitive display and output: with high-resolution display screens and multiple signal output modes such as 4-20mA, HART, Modbus, etc., to facilitate data reading and system integration.
7) Self-diagnostic function: A self-diagnostic function that allows real-time monitoring of the flow meter's working state, provides fail alerts, facilitates timely maintenance and management.
(The picture below is debugging on site)